Knürr CoolDesk®
	• Possibility of connecting to existing piping in the raised floor. • Connection to building system with the option of integrating    the Knürr CoolTrans® for constantly even water supply. • Solution via chiller, connection to a complete Knürr supply system. • Only one water flow required! No airflow routing. This saves   space, cost and energy. • Separate heat exchanger in superstructure and underdesk    installation space.
	Active monitor and room cooling Technical Data: • Cooling performance: unit for room and monitor cooling : 1,1kW • Cooling performance: unit for room and monitor cooling : 1,7kW (0,85kW each side) • Max. noice level at the workingstation: 38 dB (A) • Temperature of the air in the underdesk construction: 20°C • Pressure stage of the water supply: PN10 • Maintenance-free heat exchanger • 2 fans for air inlet • Chilled water supply G 3/4“ male thread • Chilled water return G 3/4 male thread • Waterpipes are routed in the lowest level of the installation space, under the computers • No condensation • Floor plate of warkstation can be designed as tray • Magnetic valve for leaking detection in the underdesk construction Carrying capacity: • 1500 N (static load) Hint: • The air circulation is a patented system. • The cooled air is routed in a horizontal air-flow system to the rear side of the PC-computers.
	Single Workstation Technical Data: • Cooling performance: 3700 W • Max. noise power level at workstation: 38 dB (A) • Air-supply temperature in furniture: 20-25°C • Pressure level pipework: PN10 bar • 2 fans to pull-in hot air (Maintenance-free) • Inside temperatur can be set with manual valve. • Control valve with screw joints (shut off, hydr. alignment, air bleeding, checking flow rate) • Chilled water supply G 3/4“ male thread • Chilled water return G 3/4“ male thread Carrying capacity: • 1500 N (static load) Material/ surfaces • Three layer particel board, coated with high pressure plastic laminate • Worktops in fire protection class B 2 • Underdesk installation space made of sheet-steel: RAL 7021 blackgrey • Superstructure: RAL 9006 aluminium
	Double Workstation Technical Data: • Cooling performance: 2400 W • Max. noice level at the workingstation: 38 dB (A) • Temperature of the air in the underdesk construction: 20-25°C • Pressure stage of the water supply: PN10 • Maintenance-free heat exchanger • 2 fans for air inlet • Chilled water supply G 1 ¼“ male thread • Chilled water return G 1 ¼“ male thread • Waterpipes are routed in the lowest level of the installation space, under the computers • No condensation • Floor plate of warkstation can be designed as tray • Magnetic valve for leaking detection in the underdesk construction • Two redundant fans: If one fails, the second keeps the system alive Carrying capacity: • 1500 N (static load) Material/ surfaces • Three layer particel board, coated with high pressure plastic laminate • Worktops in fire protection class B 2 • Underdesk installation space made of sheet-steel: RAL 7021 blackgrey • Superstructure: RAL 9006 aluminium